1.1 Regular Roller Chains. These chains are made for general usage.
1.2 POWERFUL Chains. These chains possess higher tensile power and greater fatigue strength.
1.3 Lube-Free Chains. These chains have longer put on life than standard chains without lubrication.
1.4 Environmentally Resistant Chains. Chains with unique corrosion resistance.
1.5 Specialty Chains, Type 1. For particular applications.
1.6 Specialized Chains, Type 2. For general designs.
Within these six groups, there are plenty of types of chains available

The drag chain test made with our equipment certifies the cable capacity for bending along the chain path
The movement patterns are run through the classic trapezoidal course profile for reflecting the stress placed on the cable in the Customer’s application. The cable can be subject to bending motion through trolleys that operate at high swiftness on precision guides, driven by cogged belts. You’ll be able to check up to 4 chains simultaneously with the same products, with a pulling capacity up to 3000 N
The test parameters (traversing distance, acceleration time, optimum speed and number of cycles) are adjustable and settable by means of a touchscreen panel. During the test routine, the cables are checked by an exterior measuring system: in case of cable break, the corresponding counter stops and the device continues to operate and test the rest of the samples until their last break (this program can be modified according to the requirements).
All characteristics could be personalized according to Customer requests.
Our worm gear pieces cover an array of applications. We demonstrate our years of experience and high level of capacity by producing a lot more than 1 million worm gear pieces every year in-house, most of which are created according to custom specifications.
Our catalog of worm equipment sets based on the standard have diameters ranging from 20 to 135 mm and axial distances of 17 to 80 mm. Furthermore, we offer custom worm gear units with diameters as high as 300 mm and center distances as high as 210 mm.
The catalog of worm gear sets can generally be supplied (from our) warehouse in a broad collection of axial distances and gear ratios with fine levels of differentiation. We are able to also calculate and generate customer-particular axial distances and equipment ratios at the plant. We prefer to produce worm gear pieces for right-handed users, but these pieces can be designed for left-handed users on demand.
We perform all main soft and hard machining guidelines in-house, including annealing in our own ovens. Because of extensive production depth, we are able to execute, actually highly complex, machining tasks specifically according to customer expectations and in the highest quality. Find out more about it here.
1. Transmission Chains
Power transmission chains are classified into six major groupings.

Have you or participants of your family considered transmission chain?