Small Precison Worm Reduction Gearboxes
There are many of specifications you will need to consider when making a worm gearbox selection.
First, what is the input and output torque requirements? Next, verify vendor horsepower/torque charts and select the correct worm gear reducer.
If the size of the gearbox will likely be an important consideration after that check the reducer dimension specifications, not all manufacturers make compact units. In fact, working with the proper supplier can help you not only find the right equipment reducer but also avoid some of the most typical errors in reducer selection. We provide a free guide to assist you find the appropriate supplier to utilize.
For low and fractional horsepower program you can expect two sizes of worm gear reducer, the SW-1 and the SW-5. Size and torque output will be the major variations between both of these models. Both feature the hollow or solid result shaft. Both versions are compact and offer users a wide selection of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your particular application or project is vital to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes on top and bottom
• Flush fitting bearing caps easy to install
• Input shafts installed on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Correct Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is necessary. This right angle gear motor is indeed versatile it could work just about anyplace.
Features & Options
Double Shaft or One Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power provides designed and built unique, high accuracy mini gearboxes that can’t be found somewhere else. Our miniature gearboxes are available in numerous configurations, including worm and wheel, cross axis helical, bevel, inline spur, and more. We are able to also provide customized micro gearboxes that are designed and created to meet your unique specifications.
E mail us for the mini gearbox the application requires, or request a quote on a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, quickness reducers, equipment drives, and gearmotors. All terms can be used pretty much interchangeably. Please be aware that the links for our small gear drives include details on the full selection of framework sizes for that series or style.
Bevel Box Micro Gear Drive
Our bevel box miniature gear drives are software rated for the optimum balance of functionality and cost. Torque could be balanced to meet up your RPM and working life requirements. Lightweight with low backlash performance (as little as 1°, with option of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input boosts to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a compact package. They provide an output shaft at 90° from the input, and so are available in gear ratios from 1:1 to 40:1. Lightweight but durable, with machined aluminium housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc a few minutes of backlash or better. Also called “shaft to bore gearboxes,” the unit provide a single insight shaft that protrudes from opposite sides of the casing; output is usually a keyed bore. Regular single- and double-end shafts can be found and supplied with keys and retainer rings. An array of gear ratios and input sizes are obtainable to meet up your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input boosts to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and long term lubrication. They offer two input shafts on reverse sides of the body, with two result shafts perpendicular to the insight shafts. Our mini 4 shaft worm gear drives deliver high efficiency efficiency with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes generate an output at 90° from the insight. They deliver superior overall performance in an amazing array applications and are constructed with little footprints, making them perfect for operations where space is limited. They offer high efficiency with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives are available in two frame sizes, and are rated for boosts to 3,000 RPM. Aluminium housings and stainless steel gears and shafts make these inline spur gearboxes challenging and corrosion resistant, for your most demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature right angle worm equipment reducers deliver superior performance with high efficiency, and feature rugged structure for challenging power transfer functions. Available in three gear ratios (5:1, 10:1, 20:1), our small worm gearboxes are built in extremely compact footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Small footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and produce a customized miniature gearbox to meet up your unique specifications. We can produce custom micro gearboxes in any configuration your application requires, with result torque levels as high as 900Nm. We are able to work from your gearbox styles, reverse engineer a preexisting unit, or assist you to develop an all-new style that provides the performance you need. Ask for a quote on a custom made miniature gearbox or e mail us to discuss your specific requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and unique ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and result shafts with drive crucial and retainer rings could be supplied to your specifications for any of our hollow bore miniature gearboxes. We offer a simple selection of solitary ended or dual ended shafts to put together in these gearboxes. All gearbox shafts are given keys and retainer rings.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our software engineers to discuss your particular needs.
We provide a broad collection of misalignment shaft couplings in in . and metric bore sizes. In . and metric precision surface shafts can be found from stock.
Contact Us for High Performance Miniature Gearboxes
We are the miniature gearbox professionals. All of our micro gear drive versions deliver superior efficiency in a little footprint, and are tough enough for challenging function environments. E mail us to find out more about our mini gearboxes, or ask for a quote on a customized model that’s tailored to your needs.
Additional benefits of worm drive gearboxes include: