3 Backlash Levels, only 3 arc-min
IP65 environment protection
Motor adaptors for any servo motor, 50w through 5kW
24 hour delivery
he Circulute 3000 Reducer is EP’s next era cycloidal swiftness reducer. It utilizes 52100 grade bearing steel on most of its speed decrease components. It is offered with a complete two year warranty, not limited by hours of operation, and is able to endure abuse that would break the teeth of ordinary velocity reducers.
The EP 3000, readily available with inputs for both servo and induction motors, includes a compact design with single reduction ratios of 11:1 to 71:1 at 95% operating efficiency. Offered in two backlash rankings and multiple mounting options, the EP 3000 has a design tough enough for both servo and regular induction motor applications. The initial two piece pin casing design guarantees output shaft backlash ratings of significantly less than 6 arc-min.
The EP provides a solution for ultra-high precision, obtaining accuracies up to 20 arc-seconds. The EP allows an application to attain negligible backlash, maintain extraordinary rigidity, and maximize control stability so that the desired output motion can be easily achieved. The look is truly a distinctive concept, utilizing a full get in touch with screw-like transmission for high effectiveness and elimination of wear. The unit provides maximum compactness using orthogonal axes and contains a big hollow shaft for flexibility.

WORM SERVO GEAR REDUCER
Features
Wide range of servo gearboxes, made to fit virtually all servo motors found on the market
Designed for the best torsional stiffness and the lowest angular backlash, to get the utmost torque and overhung loads
Bush with slot machine games and hub clamp for servomotor coupling
Benefits
Enhanced dimensional compactness because of direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The right technical solution thanks to a comprehensive selection of sizes, gear stages, transmission ratios, designs and non-standard designs.
Catalogs:
Servo equipment reducers (worm, coaxial, helical and bevel helical systems) Catalog SR
Operating instructions:
Operating instructions for gear reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is pleased to announce the expansion of our selection of Servo Reducers, today offering five degrees of precision to meet up any app requirements. The five levels of precision available allows a machine designer to select the required reducer precision to meet up their needs and their spending budget. They can be purchased in both in-range and right-angle variations, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Typical applications for these reducers include rotary & linear axis drives, and materials handling axis drives. Industries served include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
The installation faces of the HT, HP, Electronic and B versions are identical, which makes it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of engine couplings and installation flanges are available for the entire reducer range to install virtually any servo engine and the hollow bore output can be used to install output shafts, pinion shafts, or other drive elements.
These reducers are typically selected predicated on the peak cycle forces, which usually happen during accelerations and decelerations. These routine forces depend on the driven load, the quickness vs. period profile for the routine, and any other exterior forces functioning on the axis. For more selection details, please follow this PDF link.
For application & selection assistance, please call, fax or email us. The application information will be reviewed by our engineers, who will recommend the best solution for the application.
EP Inc. provides a full range of modular servo gearboxes /worm reducers. The modular design allows for configurations with motor insight flange and result pinion for rack and pinion drives, as well as solid output shafts, Hollow bore result, and input shafts for all the positioning applications. The modular design allows for universal mounting of the gearbox in virtually any orientation.
They can be utilized on motors with a NEMA23 standard flange through an adaptor package. As the gears are naturally angled, they lead to a short total amount of the electric motor and its gear.
The series can also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole may also be constructed on the gear’s output side.
Built with a straightforward and robust style, the series has gearing ratios that range between 6:1 to 75:1. The user may also customize the components through the order, so as to match the apparatus to its intended app.
The Precision Planetary Gears of the EPRG series contains a comprehensive selection of low backlash planetary gearboxes, with up to class 3′ precision, obtainable in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to 1 1:1,000). These models also include versions with dual shaft, right angle shaft and right position output, in addition to a full range of adapters for engine mounting, making them capable of meeting the requirements of actually the most diverse applications. They are made for make use of with integrated servo and stepper EP motors, mounted straight or via adaptor flanges, but can also be used in combination with other EP motor types. This range of products is founded on years of experience and represents the outcome of a decade-long study aimed at improving performance.
Optimum precision and dynamics, coupled with exceptional torque density, will be the key requirements specified for reliable servo gearboxes used. EP provides servo gearboxes for just about any software and any overall performance range. Our low-backlash planetary and right-angle gearboxes reflect our enthusiasm for advancement and the best levels of precision.
Worm equipment reducers provide market advance solution with efficiency and flexibility. Low number of basic models can be applied to a wide variety of power ratings guaranteeing best performance and decrease ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are designed for high-performance mechanical devices. When the motor quickness must be reduced, the output torque raises and send torque completely to the application. We believe that clients will appreciate our equipment reducer to attain their demand. Just check out EP, you can get more information about servo gearheads, servo gearboxes, and equipment reducers. We always keep going forward for your support.
Plug the Acceleration Reducer into the desired channel of your receiver, and plug the lead from your own servo (or servo wye) in to the male servo lead from the circuit plank. The arranged screw on the blue trim pot, located close to the top of the main circuit board, can be used to control the speed of the servo. Switch the set screw fully clockwise (CW) for normal servo speed with no speed reduction, completely counter-clockwise (CCW) for maximum speed reduction, or any place in between for partial rate reduction. The reddish colored LED indicates three feasible conditions: Slower Blinking = No Transmission; Solid On = No Velocity Reduction; Fast Blinking = Reduced Acceleration Setting
Please note that if you make any alter to the speed setting while the receiver is on, you need to cycle capacity to the receiver (change if off and back again on) for the brand new speed setting to take impact. This circuit can also be used in conjunction with our Servo Reverser to cause flap or retract servos to turn in opposite directions for correct function. Instructions are included for easy set up and use.
IMPORTANT NOTE: This device will only work on a normal, proportional servo. It will NOT work on a retract-type servo, as they do not understand any servo positions other than clockwise (CW) and counter-clockwise (CCW). Retract servos can’t be slowed down, also by a transmitter that includes this function, as their design and electronics don’t allow it. Examine the FAQ page for more information.
This device will certainly reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you wish to control for a more scale-like movement of flaps or retracts. Adjustable, it can be set to lessen the quickness of your servo from super-slow motion to no speed decrease at all, with an almost infinite quantity of positions in between. Maximum reduction time for a servo to visit 90 degrees is about 14 seconds, minimum time (no reduction) is simply the normal acceleration of the servo. Ideal for reducing or eliminating the inclination of a plane to “balloon up” when flaps are deployed. It can be utilized to control more than one servo by usage of a regular servo Y.
This is the new regulated version that can be utilized on radio systems powered by any size or kind of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH electric batteries, and HV (high voltage) receivers that operate on 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Existence batteries. This unit will NOT reduce the voltage likely to your servos.
The EP Gear Reducer is the perfect solution for servomotor applications such as for example packaging devices, gantries, injection molding machines, pick and place, and linear slides.Offered in concentric shaft, right position solid shaft, and correct angle hollow shaft styles with modular adaptor flanges and keyless compressible bushings to very easily mount to any kind of manufacturer’s servo engine. The EP Series helical gears have slanted teeth compared to spur gears with straight cut teeth, creating a smoother gear mesh, yielding considerably lower noise levels.
The reduced backlash EP planetary servo gear units are made for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. These were designed to combine the greatest possible versatility and cost-efficiency because not every application requires high-performance elements.
They offer a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo equipment units can be found in the following versions:
PSC = B5 output, simple output shaft
PSKC = B5 result, with keyway
PSCZ = B14, result, smooth output shaft
PSKCZ = B14 output, with keyway

servo gear reducer, , ! (Go here for !).