We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For far more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
multi-shafts screw conveyor for biomass electrical power plant
Description:
Multi shafts screw conveyors are utilised in the flour milling sector, specifically for conveying cereal grains,flour , and by-prosucts such as bran. Multi shaft screw conveyors are produced from carbon steel with foods-quality surface finishing .They are produced up from a U-shaped trough that is outfitted with at lea EPT a single outlet spout,an end plate at every trough stop, helicoid screw flighting welded on a centre pipe with a coupling bush at every single end ,two stop bearing assemblies total with shaft sealing device,a variety of intermediate hanger bearings with self-lubricating bushes dependent on the general length of the screw conveyor, and bolted trough addresses.
Conveying features:
Shaftless screw conveyors are largely utilized in industries such as chemical, food, medicine, paper generating, beverages, and environmental protection to produce extremely viscous supplies, paste-like viscous materia EPT (this sort of as chemical raw supplies, squander pulp, malt, sludge, and many others.) and Easy-wound materials with distinctive positive aspects.
The positive aspects of the Multi shaftless screw conveyor:
1, with environmental characteristics. Since the conveyor is a absolutely enclosed layout, it is difficult for the materials to acquire contamination in the course of the transportation process.
2. In contrast to the shaft screw conveyor, the supply quantity is 1.5 times that of the shaft conveyor with the identical diameter.
three. Blockages not often happen for the duration of function.
four, the transmission distance up to 60 ~ 70m.
5, generous look, whilst saving room, effortless to work, affordable value.
Multi shaftless screw conveyor Employing demands:
a. The W EPT non-shaft screw conveyor shall be commenced with out load, ie it shall commence when there is no content in the casing. Right after commencing, it can feed to the W EPT non-shaft screw conveyor.
b. When W EPT non-shaft screw conveyor is preliminary feeding, the feeding amount should be slowly enhanced until finally it reaches the rated conveying potential, and the feeding materials must be uniform, or else it will very easily cause the accumulation of conveying materials, overload of the travel device, and make the complete W EPT shaftless Screw conveyor damaged.
c. In purchase to assure the needs of W EPT non-shaft screw conveyor without load, W EPT non-shaft screw conveyor ought to quit feeding before halting, so the materials in W EPT shaftless screw conveyor casing can end operating soon after it is comple tel: +86~thirteen 0571 88828y conveyed.
d. The challenging material shall not be mixed into the conveyed substance to steer clear of screw jamming and injury to the W EPT shaftless screw conveyor.
e. Always check the doing work standing of each and every element of the W EPT shaftless screw conveyor throughout use and pay consideration to no matter whether the fasteners are unfastened. If the areas are discovered to be loose, the screws must be tightened immedia tel: +86~13 0571 88828y to make them resolidified.
f. The cover of the W EPT shaftless screw conveyor need to not be taken out when the machine is managing to keep away from incidents.
Model | WLS150 | WLS200 | WLS250 | WLS300 | WLS400 | WLS500 | ||
Number | ||||||||
Spiral diameter(mm) | 150 | 184 | 237 | 284 | 365 | 470 | ||
Outer diameter(mm) | 180 | 219 | 273 | 351 | 402 | 500 | ||
Incline diploma(α ) | °~thirty ° | °~30 ° | °~30 ° | °~30 ° | °~thirty ° | °~thirty ° | ||
Max Size(m) | twelve | thirteen | 16 | 18 | 22 | twenty five | ||
Capacity(t/h) | 2.four | 7 | nine | 13 | 18 | 28 | ||
Motor |
Design | L ≤ 7 |
Y90L-four | Y100L1-four | Y100L2-4 | Y132S-four | Y160M-four | Y160M-four |
Power kW | one.5 | two.two | 3 | 5.five | eleven | eleven | ||
Model | L>7 |
Y100L1-4 | Y100L2-4 | Y112M-four | Y132M-4 | Y160L-four | Y160L-4 | |
Power kW | 2.2 | three | four | 7.5 | 15 | 15 |
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For a lot more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique gear manufacturer’s (OEM) component numbers or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our firm and the detailed substitution areas contained herein are not sponsored, accredited, or produced by the OEM.