helical worm gear motor
Helical-worm gearmotors
Due to their style and from being combined with a helical equipment stage, the helical-worm gearmotors S..DR.. have particularly high efficiency. They are also extremely low-noise and thus avoid high sound emission levels.
Low-noise continuous operation: gear unit combination optimized with respect to efficiency
Do you expect a drive solution to impress you using its high level of functionality and efficiency? If so, we’d recommend our high-quality helical-worm gearmotors EP to you. These can be implemented separately in the modular program. In this way, they offer you a massive range of sizes, equipment ratios and electric motor sizes.
However, their greatest power is certainly their running smoothness and their incredibly low noise development. One thing is for certain – With the helical-worm gearmotors EP you are choosing a powerful drive solution that you will hardly also hear.
The overall concept also offers you a lot more practical product characteristics and benefits. Included in these are the significantly higher efficiency of the helical-worm combinations as opposed to single helical-worm gear products. This is one way you save additional energy in the operation of your systems and are able to noticeably reduce ongoing operating costs.
You will receive the low-noise helical-worm gearmotors EP. – to fit your individual requirements – with a wide selection of AC motors. In addition, you can freely configure all the relevant properties. In this way, you can effectively utilize all the benefits provided by this mixture of low-noise helical-worm gear unit and performance-optimized electric motor. Even greater variance can be achieved because of the optional flange or foot-mounted design and by choosing between solid and hollow shaft.
Save time and money
By opting for one of our gearmotors, you already are saving time and money with this selection and project planning. This is because our modular system enables a multitude of mixture options for gear products and motors. You can consequently reduce operating costs, count on a long service life and benefit from simplified maintenance that’s feature of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than single helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
AC motors
Combine the helical-worm equipment unit with this AC motors:
Characteristics
Quiet and reliable transmission of torque
High overload capacity
Hardened steel worm equipment and bronze alloy worm steering wheel provide exceptional durability and long service life.
Optional durable bearings deliver high radial and axial load capacity
High strength cast iron casing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft mount or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear systems are helical/helical-worm combinations, so they are more efficient than normal helical-worm equipment units. Due to their outstanding effectiveness, these drives can be used in every commercial sector and tailored to individual torque and quickness requirements. The reduction ratios afforded by the helical-worm gear stage and the low noise levels during operation make these gearmotors ideal low-cost solutions for basic applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Because of the unique combination of optimized worm wheel material with particular lubricants, optimized shape, this powerful engine achieves high levels of performance and torque. The housing machined on all sides enables diverse mounting options. Double chamber shaft seals are used as standard.
The reduced contour design makes it suitable for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Class 12 Helical and hardened and floor worm gears: Provides higher efficiencies and higher torque capability in smaller sizes.
Multiple Input Options: Integral gear motors, ” or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft installation, inch and metric output shafts, mounting pilots and flanges provide a wide selection of design solutions.
UNIBLOCK Housing: For optimum rigidity universal mounting on five sides or via a torque arm.
Sealed for Washdown: Maintains contaminants and water out.
Worldwide Engine: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to accept brakes, encoders or pressured cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors set new requirements for reliability, efficiency and economic climate with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration now and a future proof remedy. The EP gear motor offers total flexibility in mounting choices includes shaft, base, face, and flange solutions. The engine terminal box can be mounted in choice positions rotated in 90º steps around the engine frame offering for unparalleled integration possibilities.
EP gear motors comply with UNITED STATES and International requirements, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a true total option for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series is usually dirt tight and hose evidence,and can be utilized outdoors or in wet and dusty conditions without the use of additional enclosures. Complete rated output is available at the output shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Additional features:
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Due to the unique mixture of optimized worm wheel material with unique lubricants and optimized form, this powerful geared engine achieves high degrees of effectiveness and torque. The low contour design makes it ideal for implementing applications e.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a broad selection of compact, durable helical gear drives with long life performance features and simplified maintenance. The use of condition of the art helical and worm equipment combinations affords optimum functionality fulfilling a wide variety of ratio requirements. The 800 BR is definitely functionally interchangeable with many major manufacturer’s drives.
SPECIFICATIONS
Double and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All devices shipped pre-lubed for your unique mounting position with KluberSYNTH UH1 6-460
Available in NEMA C-face flanged and immediate input
Projecting and hollow output shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white (BK) and stainless epoxy finish (SBK)
Obtainable in hollow or projecting output shafts
Dual and triple reduction ratios
Flanged or foot mounted
All models adaptable to ground, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared engine. A favorably priced substitute for the standard jobs anticipated of a right-position drive.
5 gear sizes (S0 to S4).
Electric motor power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors offered with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC motor are directly flange mounted, the pinion is on the electric motor shaft. This integrated compact design can be an essential factor for the high precision and the remarkable stiffness of EP geared motors.
For vector-controlled inverter operation use of an incremental encoder is provided for as regular.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is more than 90%. All worm shafts are produced from case hardened alloy metal and the flanks are precision surface. The worm tires are made from particular wear-resistant bronze. Helical worm gears are equipped with a helical gear. Worm gears with shrink disc, torque limiter, along with adjustable backlash styles are also part of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Overall efficiency gearboxes in universal style. The housings are produced from top quality cast iron. The rugget wall space and inner ribbing ensure incredibly torsional stiff and noise dampening housings. The external ripping offers a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from high quality grey cast iron with tough walls and internal ribbing
Severe torsional resistance and low noise
Case hardened worm shafts and worms with precision ground flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes built with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available because solid shaft or hollow shaft
Shrink disc, torque limiter,and also adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG