ep

February 24, 2021

Observing a couple of guidelines for right set up is crucial to your trustworthy and right operation with the gearbox or gear motor.
The principles set out listed below are intended like a preliminary guidebook to deciding on gearbox or gear motor. For helpful and appropriate installation, observe the guidelines offered while in the set up, use the maintenances guide to the gearbox obtainable from our revenue department.
Following can be a brief outline of installation guidelines:
a) Fastening:
Area gearbox on a surface supplying satisfactory rigidity. Mating surfaces needs to be machined and flat.
Mating surfaces have to be inside definite geometric tolerances (see guide). This can be primarily genuine of flange-mounted gearboxes with splined hollow shafts.
In applications that involve large radial loads in the output finish, flange mounting is advisable for some gearbox sizes as this mounting tends to make utilization of the double pilot diameters presented in these gearboxes.
Be sure the gearbox is appropriate for your needed mounting place.
Use screws of resistance class eight.8 and in excess of to secure the gearbox. Torque up screws on the figures
indicated within the pertinent tables.
With transmitted output torque better than or equal 70% on the indicated M2max torque, and with
regular movement reversals, use screws with minimal resistance ten.9.
Some gearbox sizes can be fastened working with either screws or pins. Of pin seated in the frame the gearboxes be at least 1.five occasions pin diameter.
b) Connections
Secure the connection parts to gearbox input and output. Don’t tap them with hammers or related tools.
To insert these elements, use the support screws and threaded holes presented around the shafts. Make sure you clean off any grease or protects in the shafts in advance of fitting any connection elements.
Fitting hydraulic motors.
Be cautious the O ring involving motor flange and gearbox input flange when assembling. Set up the
hydraulic motor just before filling lube oil in to the gearbox.
Connecting the hydraulic brake.
The hydraulic circuit must be such to be sure that brake is released instants ahead of gearbox commences and utilized immediately after gearbox has stopped. Check that strain within the hydraulic line for brake release is at zero when gearbox is stopped.
Course of rotation
Motors are linked to the ideal electrical or hydraulic circuit as outlined by their direction of rotation.
When doing these connections, keep in mind that all gearboxes, no matter whether inside the in-line or ideal angle style, possess the similar path of rotation the two at input and output. For far more specifics of the connection of electrical and hydraulic motors, see appropriate sections on this catalogue.