ep

January 19, 2021

Materials Handling Power UNIT two
Basic Description
This power unit characteristics electrical power up gravity down circuit. Activate the start solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve together with the reducing speed controlled by the stress compensated flow handle valve. Products of this series might be broadly utilized in the field of logistic products like fork lift, mini lift table, and so on.
Exclusive Notes
one. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean the many hydraulic parts concerned just before mounting the electrical power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst,which ought to also be clean and free of charge of impurities, N46 hydraulic oil is advised .
4. Oil modifying is required after the initial a hundred operation hours,afterwards once each 3000 hours.
5. The power unit really should be mounted horizontally.

Material Managing Energy UNIT 1
Common Description
This electrical power unit is developed for your fork lift sector, consisting of remarkably efficient gear pump, DC motor, manual raise and decrease valve, tank, ect. The up and down movement are managed through the lever in the manual release valve, which can be equipped with an electric switch to activate the motor. The lowing velocity is controlled from the pressure compensated movement handle valve.
Special Notes
1. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean the many hydraulic components concerned just before set up of the electrical power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which ought to also be clean and no cost of impurities, N46 hydraulic oil is proposed .
four. Oil transforming is needed after the original one hundred operation hrs, afterwards after every single 3000 hrs.
5. The energy unit proven is designed to be mounted horizontally.