DUMP TRAILER Power UNIT-DOUBLE ACTING
This energy unit features a energy up electrical power down circuit with load holding on the two A & B ports. A pressure compensatred movement control can be added to circuit to control the decent pace on the cylinder.
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean the many hydraulic components concerned just before set up of the power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which need to also be clean and absolutely free of impurities. N46 hydraulic oil is encouraged.
four. The electrical power unit must be mounted horizontally.
5. Check the oil degree in the tank right after the preliminary working with the electrical power unit.
six. Oil changing is required following the original one hundred operation hrs, afterwards once every single 3000 hrs.
DUMP TRAILER Electrical power UNIT- SINGLE ACTING
This energy unit includes a energy up gravity down circuit. Commence the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve may be presented if necessary. Also a strain compen sated movement handle can be additional to your circuit to manage the descent speed of your cylinder.
Remark: Please seek advice from our income engineer for your various pump displacement, motor power or tank capacity.
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic elements concerned prior to installation of the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which need to also be clean and totally free of impurities.N46 hydraulic oil is proposed.
4. The power unit should be mounted horizontally.
5. Check the oil degree from the tank just after the preliminary working with the power unit.
6. Oil changing is needed right after the original one hundred operation hours, afterwards the moment every 3000 hours.