January 13, 2021

Any damage within the teeth surfaces of the sprocket diminishes the lifestyle from the conveyor chain.
With conventional sprockets, substantially worn sprocket teeth were repaired by teeth padding or even the total sprocket was replaced. In either situation, repair was expensive and with teeth padding, accuracy was impaired. We developed new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our clients for the dramatic financial savings in price and time.
The teeth may be replaced by two procedures: personal tooth substitute or sectional teeth replacement.
The bolts and nuts used for mounting the teeth on towards the sprocket are spot-welded to avoid loosening.
The respective structures are illustrated to the ideal.
The above photo along with the major correct illustration present a sprocket for individual tooth substitute. Because the joint face amongst the replaced teeth along with the sprocket is formed within a exclusive arc, the bonding accuracy is higher and also the sprocket strength is enhanced. On top of that, since the load acting on the mounting bolts is decreased, there is certainly much less likelihood of loosening. This sprocket building is patented.
There are actually two kinds of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are used for substantial sprockets getting heavy loads and welded sheet steel hubs for other applications.