ep

February 5, 2021

Why Coupling Grease?
Satisfactory lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is specifically developed for gear coupling applications to increase coupling lifestyle although dramatically cutting down maintenance time. Its large viscosity base oil and tackifier mix to maintain the grease in place and stop separation and it really is in complete compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in shade and produced using a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to high centrifugal forces usually located in couplings. Bearing or general purpose greases often separate and drop effectiveness due to higher centrifugal forces over the many components at large rotational speeds. These substantial centrifugal forces encountered in couplings separate the base oil in the thickeners. Hefty thickeners, which have no lubrication qualities, accumulate from the gear tooth mesh area leading to premature coupling failure. Gear Coupling Grease is designed to extremely resistant to centrifugal separation from the oil and thickener, which makes it possible for the lubricant to be applied to get a reasonably extended time period of time.
Among the list of secrets for the good results of Gear Coupling Grease would be the variable consistency through the entire operating cycle of the application. The consistency of our gear coupling grease alterations together with the operating problems. Doing work of the lubricant underneath actual services situations leads to the grease to grow to be semi-fluid, functionally solash lubricating the wear surfaces from the coupling. Because the grease cools, it returns on the original consistency, thereby stopping leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, 1 lb. and 5 lb. cans.
Capabilities
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust safety
Substantial load carrying capabilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in spot below higher speeds
Resistance to centrifugal separation
Reduction in down time & upkeep cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated using a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.